Quad Photobeam Detector

ENFORCER E -964-Q165Q Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

  • Built-in laser beam alignment system speeds accurate, reliable positioning
  • Multi-frequency (4 channels selectable)
  • Quad infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
  • Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
  • Weatherproof, sunlight-filtering case for indoor & outdoor use
  • Anti-frost system with built-in heater so that beam functions even in extreme conditions
  • Automatic input power filtering with special noise rejection circuitry
  • NO/NC alarm output
  • N.C. tamper circuit included
  • Non-polarized power inputs
  • Quick, easy installation with built-in laser beam and audible alignment system
  • Built-in alignment strength indicator
  • Interruption time adjustable for nearly all situations
หมวดหมู่:

คุณสมบัติ

• Multi-frequency: Four selectable beam frequencies to eliminate interference between multiple units for flexible perimeter protection.

• Automatic input power filtering with special noise rejection circuitry.

• Environmental Output: Signal is sent if a degradation in environmental conditions is detected such as thickening fog to prevent false alarms.

• Audible beam alignment (buzzer), beam strength indicator, and laser alignment make transmitter and receiver alignment faster.

• Voltage testing points for fine tuning the beam alignment. Input voltage: 12-24 VDC/VAC (non polarized).

• Delay time adjustable for nearly all applications.

ข้อมูลทางเทคนิค

Mode E-964-165Q E-964-330Q E-964-495Q E-964-660Q
Max. range (outdoor) 165’ 330’ 495’ 660’
Max. range (indoor) 330’ 660′ 990′ 1320′
Current (Tx & Rx) 110mA 115mA 120mA 125mA
Current (Tx & Rx & heaters) 260mA 270mA 280mA 290mA
Input Voltage 12~24VAC/VDC (Non-polarized)
Delay time 50msec~700msec (Variable)
Detection method All 4 beams simultaneously broken
Selectable beam frequencies Four (4) channels
Alarm output Form “C” relay COM/ N.O./N.C., 1A @ 125VAC/24VDC
Tamper output (Tx & Rx) N.C. switch, 1A @ 120VAC
Environmental output Selectable N.O. or N.C., 1A @ 125VAC/24VDC
Beam-strength indicator 5 LEDs indicate signal strength from high to low
Alarm LED (Rx) Red LED – ON – Beam is broken or Tx & Rx misaligned.
Power LED (Rx & Tx) Green LED – ON – Power is connected.
Laser wavelength 650nm
Laser output power ≤ 5mW
Alignment angle Horizontal: ±90° , Vertical: ±15°
Operating temperature -13°~131° F (-25°~55° C)
Heater operation Turns ON @ 41°F (5°C), Turns OFF @ 77°F(25°C)
Weight 5.7 lbs. (2.6kg)
Ingress protection IP55
Case PC resin
Dimensions 15-1/4” x 4-7/16” x 4-11/32” (387 x 113 x 110)

รีวิว

ยังไม่มีบทวิจารณ์

มาเป็นคนแรกที่วิจารณ์ “Quad Photobeam Detector”

สินค้าที่เกี่ยวข้อง

Twin Photobeam Detectors

Wireless Barrier Beams

อุปกรณ์ตรวจจับความเคลื่อนไหวภายนอก